DZC3030,DZC4040,DZC5050 CNC plate drilling machine
Machine Tool Usage:
This machine is mainly used in industries such as electricity, petroleum, chemical, boiler flanges, heat exchanger tube plate parts processing, you can save them one by one crossed the line. Just enter the correct CAD design drawings, two-spindle automatic continuous drilling, processing CNC, high efficiency, high precision, convenient programming, simple operation can be realized.
This machine is flexible CNC drilling machine can be adapted to mass production of many varieties.
II.Structure and configuration:
This equipment bed and vertical slide, gantry and horizontal slide, vertical drilling head, chip conveyor, cooling systems, centralized lubrication systems, electrical systems, and other components.
1.This machine is a gantry mobile drilling machines, reduced the length of the bed, floor space savings. Bed, beams with steel plate welded structure, after artificial aging treatment, accuracy and stability. Optimize the design of the gantry structure greatly improve the stiffness of the machine tool and can guarantee large cutting parameters. Work bench plane are arranged a number of transverse T-shaped grooves for the clamping fixture and the workpiece.
2. gantry longitudinal (X-axis) mobile high precision linear guideways rely on installed on both sides of the bed body oriented, flexible and mobile. Driven by AC servo motor driven precision ball screw bilateral synchronous drive. Rail and screw have to eliminate the gap, the response is good, high positioning accuracy. Bilateral synchronous drive to ensure the parallel movement of the gantry, to ensure in any position of the Y-axis perpendicular to the X axis degree.
3.Lateral drilling head (Y axis) rely on two precision linear guideways mounted on the front of the gantry beams oriented, driven respectively by AC servo motor driven by the timing belt and precision ball screw drive, to ensure that the work of the high accuracy.
4. Drilling head by frequency conversion motor gear reducer (i = 7.5) driver independent spindle; spindle feed by AC servo motor driven by the timing belt and precision ball screw drive; Mohs No. 6 taper spindle taper with there are a variety of specifications Mohs adjustable sets, you can install a larger drill diameter range.
5. The machine can be used the electronic handwheel manipulation when drilling the first hole setting the feed position, drill the same hole workers into the fast-forward → → rewind the program can be realized. Thus the process saves a lot of time, production efficiency is greatly improved, and also has an automatic chip breaking back crumbs, pause, protection of the broken drill holes for the jump manual functions.
6. This machine is equipped with a flat-panel chain auto-Chip and Chip Cart, coolant by chip conveyor to collect recycling.
Name |
Item |
DZC3030 |
DZC4040 |
DZC5050 |
||||
Maximum range of workpiece drilling |
L x W |
3000X3000mm |
4000X4000mm |
5000X5000mm |
||||
Work table |
T-slot width |
28mm |
||||||
Drilling head |
Nos |
2 |
||||||
Spindle taper hole |
Mohs No. 6 |
|||||||
Spindle nose to table the maximum distance |
550 mm |
|||||||
Maximum drilling diameter |
Φ70mm(double head) |
|||||||
Φ90mm(single head) | ||||||||
Maximum drilling depth |
200mm |
|||||||
Spindle speed |
120—560r/min |
|||||||
Spindle motor power |
11kW |
|||||||
Maximum spindle torque |
525Nm |
|||||||
Spindle Work feed Speeds |
0-4000mm/min |
|||||||
Gantry longitudinal movement |
Maximum stroke |
3000mm |
4000mm |
5000mm |
||||
X-axis moving speed |
0-8m/min |
|||||||
X-axis servo motor power |
2X2kW |
|||||||
Power head lateral movement |
Drilling maximum center distance |
3000mm |
4000mm |
5000mm |
||||
The moving speed of the Y-axis |
0-8m/min |
|||||||
Y-axis servo motor power |
2x1.5kW |
|||||||
Positioning accuracy |
X-axis |
0.08mm/ Full-length |
||||||
Y-axis |
0.08mm/ Full-length |
|||||||
Repeat positioning accuracy |
X-axis |
0.04mm |
||||||
Y-axis |
0.04mm |
|||||||
Chip removal and cooling |
Chip conveyor type |
Tablet chain |
||||||
The number of chip conveyor |
1 piece |
|||||||
BTA speed |
1m/min |
|||||||
Chip conveyor motor power |
0.75kW |
|||||||
External cooling pump motor power |
0.75kW |
|||||||
Automatic lubrication system |
Lubrication Pressure |
2MPa |
||||||
Oil injection lubrication points |
0.1mL |
|||||||
Lubrication cycle |
6-10min |
|||||||
Electrical system |
CNC system |
FAGOR8055 |
||||||
CNC axes |
6 |
Supertime Technology is well-known for the high quality, reliable performance and easy operation of our dzc3030,dzc4040,dzc5050 cnc plate drilling machine, which is one of the leading China manufacturers and suppliers. Should you are interested in our machines, please feel free to check the quotation with us.